the Zip-Tie to attach the Grommets in the Banner to the Rings. Complete the installation by sliding the End Caps onto the ends of the Fiberglass posts.

The product parts include:

Brackets (x 2)
Fiberglass Arms (x two)
End Closures (x two)
Pegs (x 2)
Rings (x two)
Zip-Ties (x zwei)

Where Do I Go From Here

You start the steps to creating your distinctive Extended Sized Banner by clicking on TheSignChef.

We provide FREE online sign design services ready, for your use anytime day or night. Try our unique specialized software, Sign Magic, to create exactly the banner you need. Give it a go. There's no obligation to purchase anything.

We're also ready with Live Design, if you want person-to-person , personalized service.

Contact us at 800-899-6272 or jump to our web site at TheSignChefand we will help you get your outdoor banner installed and selling!

You

Elegant, nothing ostentatious, but with plenty of attention-grabbing power, the custom banners Sleek Exhibitor is a strong solution to the challenge of how to exhibit a portable custom banner in an attractive and low-cost manner.

The Sleek Exhibitor is made for cloth banners and other light banner products. Raising in height from 37 " up to ninety six inches and in width from 52 " to 96 inches. So there's an unlimited number of banner sizes you will be able to exhibit.

Features:

* Slender light configuration with all the sturdiness of bulkier banner exhibitors.
* Adjustable from 55 " to ninety-six inches in height
* Adjusts to widths from fifty-six inches to 79 inches
* No cost carrying case-with rollers and straps

Sleek Exhibitor Parts
* Feet (x2)
* Upright Poles (x2)
* Cross section bars (x2)
* Little Screw (x2)
* Screws with Handles (x4)
* Screw Driver
* Replacement Flexible Ends

How to Use The Sleek Exhibitor

Step 1
Remove all parts out of the sack. Place the base of one Upright Shaft - end with screw hole - into the hole in the top of a Foot. Place a Small Screw through the opening in the bottom of the Foot, and screw into the base of the Upright Shaft.

Step 2
Loosen the telescoping clamps on the Vertical Shafts and extend the poles at least a several inches until the bottom side holes are available.

Step 3
Loosen the extending clips on the Cross section bars so that each side extends about an inch past the entire width of the banner.
Slip the Cross Section Bars through the pole slots on the custom banner.

Step 4
(Best done with 2 people) Line-up the shaped ends of the Cross section bars!

Trade shows, business conclaves, and large, indoor arenas present a unique challenge for companies hankering to attract customer attention with custom banners-what will you do to get that kind of big-time notice?
Typically, your display is not the sole company vying for attention. Trade shows, convention auditoriums, and other large commercial spaces may have company's booths or a banner stand on every square inch of space, lined up like cans on a shelf.
Now, prospective clients think such an arrangement is the bees knees. All products or businesses are conveniently accessible as they walk by. Prospective clients do not have to march all over creation trying to find exactly the item they are seeking.
But for a concerned owner like you, it's a little bit of an obstacle-probably more than a little a bit. It's a looming challenge. So, you must have a creative answer.
A Effective Choice
A large number of businesses now answer that problem straight ahead with substantial high-appeal vinyl graphics. They look for maximum viewability in a crowded space. But because they travel and move their displays from place to place, they also need a banner display that's flexible and portable.
The Multi-Master Banner Display may be just the proper product to get your signage noticed in those large open halls areas. This banner stand is light weight, easily packed and transported, and durable enough to hold your banner in position for as long as you want.
The Multi-Master is offered in 2 widths: 47" and 59". The feathers are:

* Flexi-frame or Budget-Frame
* Extending pole that accommodates signs up to 118" in height.
* Made to any desired width.
* Anodized Aluminum and Black Matte finishes
* Accommodates one or two-sided graphics
* Uses either the Mark Bric banner rail, or particular plastic strips with tape, to connect graphic banners to the holder
* Multi-connectors connect both plain boards and frames.

Our Special Double Guarantee Assures the Quality of Your Sign

First, we guarantee that your banner design will appear exactly the way you've proofed it. If we mess up, we will make it over. No worries.

Second, we guarantee our work. If our materials or craftsmanship fail to provide a high quality product, we'll make it over. No excuses.

You'll have assurance that we will deliver precisely what you ordered.

Where Do I Go From Here

You begin the process of designing your new banner and Multi-Master Banner Stand by clicking on www.thesignchef.com.

We offer NO COST online design services available at your finger tips 24/7, 365. Use our exclusive proprietary software, Sign Magic, to design exactly the banner you need. Take it for a spin. You don't have to buy anything.

We are also ready with Live Design, if you need person-to-person , one-on-one.

Contact us at 800-899-6272 or click on our web site at www.thesignchef.com and let us your Vinyl and banner stand or custom banners installed and selling!

Let us say you have recently moved into a new store with a lot more space you enjoyed in your old place-high ceilings, more room, lots of room for custom signs. You cannot wait to make preparations and open your doors. But now the smaller custom signs that did the job before just fine in your former, more limited facility will hardly attract attention. They just not prominent enough. They'll }get lost in the spacious space. How can you get the signage you need?

Convention Display

Or maybe the large trade show is on the calendar, and you realize the event center will be filled with large signs from door to exit. You've got a solid product to offer, but so do your competitors. You have been waiting to have your merchandise on exhibit for your prospects to see. And the last thing you need is to discover yourself hiding, just about unseen, because others can't find you the sea of large banners. How can your signage stand out?

Versatility

Or perhaps you have had stationary signage; that is, signs that are always installed in a single location. They work fine. They're prominent and noticeable, but you find they are not versatile in what they can do because you can't move them around. You'd like big banners that you can place exactly where you want-by the front entrance, near a specific merchandise display, or where ever you think they will sell your product most effectively. What can you do?

An Answer

One very effective solution is to utilize a big vinyl graphic mounted on a moveable banner frame. And a common sign display options is the Flexi Banner Stand. This simple yet sturdy, [vinyl sign installation choice assists you in getting your message seen in a distinctive, professional manner.

The Flexi Banner Stand allows you to exhibit your banners with style and simplicity. You will also have the option of attaching more than one stands in a linked manner for a very large, high quality, vinyl sign exhibit. The free transport container let's you transport your stand easily.

Here are the features of the Flexi Banner Stand:

* Tough anodized aluminum
* Signs with heights from 47" to 94"
* Slide-in graphics
* Easy-to-install twist shaft to secure height in place.
* Versatility to connect multiple banner stands to make several-panel display.
* Collapses to sit on airplanes, making it remarkably portable.
* Free travel bags
* Single and double-sided options!

And don't worry about setting up your new vinyl sign stand. Mounting is simple. Here is how you do it.

Step 1: Remove frame from carrier
Step 2: Extend the stand pole upward to desired height.
Step 3: Then twist the shaft to secure the frame in the place. You're ready to display a single banner graphic.

Now here is how you put a banner on your frame.

Step 1: Put the vinyl border in the bracket.
Step 2: Utilize the locking latch to make the banner tight.

That's it! You job is completed!

If you wish to connect multiple banners to create a very large banner, simply use the Complimentary Joiner Clips (in your kit) to connect two or more stands. You'll achieve a terrific several-panel display.

Where Do I Go From Here

You begin the steps to designing your new banner and Flexi Banner Stand by clicking on www.thesignchef.com.

We offer FREE online design services ready, for your use anytime day or night. Try our unique proprietary system, Sign Magic, to design precisely the banner you want. Take it for a spin. You don't have to buy your Flexi Banner Stand.

single-sided banners fast and with no problems. Just finish the banner with Number Two grommets and hang from the display hooks.

The sturdy metal platform disallows the stand from teetering. It is superlative for retail appositeness when you desiderate habitués to see your elucidation from either angle. It adjusts simply with the twist of a thumb screw. How simple is that? And the design is crisp, simple, and will draw new prospects' attention to your message.

Here's a summary of the Curved Cantilever Display's advantages.

* A Two-Double-sided or 2 Single-Sided graphics, quickly and simple
* Displayed banner with two grommets and hung from the mounting hooks.
* Sturdy base disallows the unit from tipping
* Excellent for merchandising functions when you want clients to view your Brand from both sides.
* Easy adjustments with the twist of a finger-turned screw.

Now, how {can you be assured

And that is frustrating. But, how can you find a solution? Easy!

Today you can rise above the competitors, simply and effectively. When business owners truly want to make huge response, they often utilize the BannerUp "Plus" roll-up banner stand. The "Plus" points to the most visibility you receive with this banner display choice.

The BannerUp "Plus" is unique for a rollup unit. This prominent, extended size custom sign dispolay rises head and shoulders above the typical banner-even the supposed "big" custom banners.

These "Plus" sizes give completely brand new and enhanced opportunities to display your message at business events, public places-in any
place where extra-large sized advertising is not only an option, but often necessary, to get the most notice.

The features of the BannerUp "Plus" custom banner display are as follows:

* 17 inches of expanded attention!
* Widths from 47 " to 59 inches
* Rolls up for simple storing

Set up is easy. Simply use these easy steps.

1) Unpack your dislay from the storage bag
2) Unroll the banner
3) Attach the stand shafts
4) You're finished!

Our Unique Double Guarantee Assures the Value of Your Sign

First, we guarantee that your sign design will look exactly the way you have proofed it. If we mess up, we will do it again. No fuss.

Number 2, we guarantee our work. If our materials or workmanship fail to provide a high quality product, we will do it again. No excuses.

You'll have assurance that we will deliver exactly what you ordered.

Where Do I Go From Here

You begin the process of designing your new custom banner and BannerUp "Plus" Banner Stand by jumping online at www.thesignchef.com.

We provide FREE online design services ready, for your use anytime day or night. Try our unique proprietary software, Sign Magic, to create exactly the banner you need. Take it for a spin. There's no obligation to buy anything.

We're also available for Live Design, if you want individualized, one-on-one.

Contact us at 800-899-6272 or click on our online site at www.thesignchef.com and let us help you get your vinyl banners and BannerUp "Plus" Custom Banner Stands installed and selling!

They're everywhere. They move past us visible on large vehicles. They call to passersby from their perches on exterior structures. And they greet us as we enter museums, upscale stores, trade shows, retail outlets, and even corporate sites.

They are crisp and attention-getting, and you cannot avoid noticing them.

They are custom banners, and they're a terrific and effective way to get your marketing message to prospective customers.

And yet ...

What If you could announce your company's message that way? If only your business message and image caught the attention of thousands of new prospects?

What would that do for sales, if your business had the kind

and the narrow frames, in black or chrome, give a crisp, appealing look.

The kit has everything you need.

Here's how you do it:

1. Pull back the adhesive line cover and adhere it to your banner's back top and bottom borders.

2. Insert both the top and bottom edges of your banner into the Slot Lock Rails using the Quick Stick tool.

3. Insert the Slide Clamps in the channel of the Rail. These will secure the chain that holds your banner from the flat surface.

4. Adjust the setting of the Clamps to best meet your mounting needs. When the Clamp is in place, tighten the screw. The screw should be out of sight when installed correctly.

5. Push the aluminum End Caps onto the Slot Lock Rails to provide your banner a clean, distinctive look.

Secure the installtion Chains to the Slide Clamps and set to the right height. Your brand new banner looks great and will be all set to put on display.

More mounting Choices:
* See-through Ceiling Clips
* Screw Eyes
* Vacuum Window Mounts
* Wall Installation Foam Adhesive
* Nylon Ties for banners with grommets banners

What Do I Do Next?

You start the process of designing your new SignzupTM Indoor Sign Kit by clicking on www.thesignchef.com.

We offer NO COST online design services ready, for your use anytime day or night. Try our unique proprietary software, Sign Magic, to design precisely the banner you want. Take it for a spin. You don't have to purchase anything.

We are also available for Live Design, if you need individualized, one-on-one.

Call us at 800-899-6272 or click on our online site at www.thesignchef.com and we will your SignzupTM Indoor Sign Kit up and marketing!

"gallery" appearance at a reasonable price.

You can change banners quickly and easily making this sign stand a solid value. Mounting a new graphic requires only seconds. Simply secure your banner utilizing the built-in spring-loaded brackets. And you're done!

It's also highly portable. You can place the stand anywhere you choose at a particular time. It is lightweight, yet durable. So it's simple to reposition.

You won't squander time attempting to design and install and exchange out hard-to-manage signs, when all you need to do is pick up the stand and carry it with you.

The EZ Change "A" Frame gives you with:

* Gallery-quality look
* Two-sided graphics
* Durability and easy relocation
* A 45" x 25" fixture
* Image view of 33.4" x 23.6"

That means that your customers will take notice of the high quality of your banner. Your business will get more attention from exactly the kinds of prospects you're hoping to reach. Your business imagereputation as a consummate expert and trusted vendor will rise. Sounds good, right?

What Do I Do Next?

You begin the steps to designing your new Wind Wise Banner Stand by clicking on www.thesignchef.com.

We offer NO COST online design services available at your finger tips anytime day or night. Use our exclusive proprietary system, Sign Magic, to create precisely the banner you need. Give it a go. You don't have to buy anything.

We are also available for Live Design, if you need individualized, personalized service.

Call us at 800-899-6272 or jump to our web site at www.thesignchef.com and we will your custom banners up and marketing!